(FUEL ADDITIVE)

INTRODUCTION:

To control the problems occurred during the application of fuel like FO, LDO, DIESEL, BIO-DIESEL etc is the main purpose of using FUEL+.

CONTENTS:

FUEL+ is a complex blend of additives like octane number booster, antiknock agent, freezing point depressant, antioxidant (corrosion inhibitors), de-icing agents, Combustion chamber deposit modifiers, anti-gumming agents etc.  

BENEFITS / ADVANTAGE:

• Improves combustion, reduces carbon/ash, and limits soot formation as well as smoke
• Raises octane / cetane number
• Improves fuel combustion and
• Minimizes cold-end corrosion
• Disperse sludge – a more easily burned state, Increase
• Separates emulsified water
• Liquid formulation – easy to

 

DIRECTION FOR USE AND DOSAGE:

FUEL+ is completely oil soluble and should be added in to the suction side of the pump. Alternatively, it can be added into the storage tank. As a general guide, the average dosage should be 1 Liter of FUEL+ with 3000 liters of fuel oil (1:3000). Alteration can then be made according to operating experience and result obtained.  

STORAGE:

Store in Cool & Dry place away from direct sunlight  

SAFETY PRECAUTIONS:

Before handling the product, refer material safety data sheet which contains detailed information about this product (available on request).  

PACKING:

50 Liter HDPE Carboys  

CONTACT US:

NORTHERN FUEL CARE

OPP. VIRK MARKET, DOSARKA, DISTT. AMBALA. CALL:- 098780-25203 | 098122-79102

E-MAIL ID:- northernfuel9@gmail.com. CONTACT PERSON:- MR.RAJEEV DUTT.  

(FUEL ADDITIVE)

MATERIAL SAFETY DATA SHEET

USP of this product is, its non-inflammable and also increases the fuel efficiency, Octane energy fuel booster,Solvent free, Organic environment products, Flash point above 200+.  

ADDITIONAL INFORMATION: –

References: – The product is non-hazardous in nature and non- inflammable when at rest but accelerates output when used. Instructions of use should be strictly followed.   Protective measures for excessive deliberate exposures are however detailed below.    

1.  CHEMICAL IDENTITY: –

1. Chemical Name: – Fuel
2. Chemical clarification: – A.
3. Base of FUEL+ (FUEL ADDITIVE) —–:.Hydro-generated veg oil & amines with catalyst (ORGANIC BASE).
4. Composition Of Product :- Tertiary alkyl primary amines and blend of organic
5. Trade name: – FUEL+
6. Formula: – A.
7. Shipping name / label: – A.
8. A.S.: – N.A.
9. Hazchem no: – N.A.
10. N.No. : – N.A.
11. Regulated identification: – Hazardous waste D. No.: – N.A.
12. Hazardous Ingredients: – None

   

2.  PHYSICAL AND CHEMICAL DATA: –

1. Distillation range: – 80 to 130oc
2. Physical state: – liquid
3. Appearance: – Clear Light Yellow Liquid
4. Freezing point: – Below 0oc
5. Vapor Pressure: -N.A.

1. Odor: – pleasant
2. Solubility: – Insoluble in water, soluble in ether, alcohol, organic
3. Specific gravity: 88 – 0.91
4. pH : A.

   

3.  FIRE AND EXPLOSION HAZARD DATA: –

1. Flammability: – Non-flammable.
2. Flesh point: – Approx 60′ c
3. explosion sensitivity to impact : – Yes
4. explosion sensitivity to static electricity : – Yes
5. Hazardous polymerization: – None
6. Corrosive material: – Non-corrosive to metal
7. Oxidizer — None

 

4.  REACTIVITY DATA: –

1. Chemical stability: – Stable in normal
2. Incompatibility to other material: – Aqueous material; inorganic salts
3. Reactivity: – Normal
4. Hazardous reaction products: – None

 

5.  HEALTH HAZZARD DATA: –

1. Routes of entry: – Eye contact, skin contact, oral and
2. Effects of exposure symptoms: –
   1. Immediate first aid
   2. Wash with plenty of water at least for 15
   3. Seek doctor advice in case of oral intake
3. Emergency treatment: – Remove source, seek doctor
4. Permissible exposure limit: – LD 50: No data

   

6.  PREVENTIVE MEASURES: –

1. Personal Protective Equipments: -Use gloves, goggles, Coveralls Face wash, eye wash, fountains and boots
2. Handling and storage precautions: – Do not store near hot material, instead store in a closed and cool area away from direct

 

7.  EMERGENCY AND FIRST MEASURE: –

1. First aid comments: – Provide general supportive measure (Warmth, comfort and rest). Consult a physician and the nearest poison control center for all cases if ingestion or eye contact and all but trivial causes of inhalation or skin
2. Fire: – Fire extinguishing media: -Dry chemical, carbon dioxide, water spray and

 

1. Fire: – Special procedure: – Use water spray to cool
2. Exposure: – First aid measures: – Water wash well
3. Antidote/dosage: – Wash stomach / Give milk.
4. Spills: – Steps to be taken: – Water wash
5. Waste disposal method: – A.

   

8. GENERAL INFORMATION:- CAS No:- 68955-53-3 0.0
9. SUITABLE CONSTRUCTION OF MATERIALS:- All type of energy oriented base oil to boost energy level.
10. OCCUPATIONAL LIMITS:- Be cautious while using the product- where to be used and where not to be used.

     

9.  HAZARDS SYMBOLS:-.

   

10. NON TOXIC SYMBOLS :-

                       

11.  ADDITIONAL INFORMATION: –

References: – The product is non hazardous in nature and non- inflammable when at rest but accelerates output when used. Instructions of use should be strictly followed.              

12.  SUPPLIER’S DATA: –

Name of the firm: – NORTHERN FUEL CARE

OPP. VIRK MARKET, DOSARKA, DISTT: AMBALA CALL: 98780-25203/ 98122-79102.

Email – northernfuel9@gmail.com CONTACT PERSON:- MR.RAJEEV DUTT.          

13.  DISCLAIMER: –

Information contained in this material safety data sheet is believed to be reliable but no representation guarantees or warranties of any kind are made as to its accuracy, suitability for a particular application or results to be obtain from them. The data and specifications are given in the best interest of the end user.    

14.  SUPPLIER’S DATA: –

Name of the firm: – NORTHERN FUEL CARE

OPP. VIRK MARKET, DOSARKA, DISTT: AMBALA CALL: 98780-25203/ 98122-79102.

Email – northernfuel9@gmail.com CONTACT PERSON:- MR.RAJEEV DUTT.     MANUFACTURED BY SOHAM CHEMICALS, MUMBAI

www.sohamchemicals.com/www.chemicals-asia.com